Through years of insistent development and innovation, we have finally developed a series of crystallized glass panels with Nanotechnology, which must be an extraordinary breakthrough of conventional decorative stones in the world.

This is a kind of brand new crystallized glass material, and it possesses a lot of excellent physicochemical properties as follows.

• Weight/Strength
  Living Stone is lighter and stronger than granite and more resistant to scratching and abrasion than natural marble and other artificial marble such as normal crystallized glass. They are not subject to the fissure and fracture patterns that commonly result from the quarrying of stone. With a greater bending strength, they can be fabricated into thinner panels than natural stone.
• Zero water absorption
• Non-radioactive, non-toxic
• Easily Formed into Curved Panels
  Living Stone can be re-formed into a wide range of convex and concave radii panels, resulting in greater design flexibility at lower cost than hewn stone.
• Impermeability/Minimum Maintenance
  Living Stone is virtually impermeable and are not subject to freeze-thaw damage, penetration by rust, mortar or other staining substances. Moisture absorption, as a design consideration, has been eliminated. With Living Stone, contaminants are easily removed during regular building maintenance. Even graffiti can be cleaned without difficulties.
• Low Thermal Expansion
  With an extremely low coefficient of expansion, Living Stone is not subject to thermal cracking that can affect other cladding materials.
• Weather Resistance
  Living Stone is significantly more resistant to acids, alkalis, oils and other chemical substances than either marble or granite. Unlike stone, their surface and physical properties are not degraded even after years of exposure to environmental pollutants, including acid rain.
• No air pores at surface and section
• Add elegance to all areas used

Application

1. Interior & external wall and Flooring Tile,

2. Staircase, Coffee Table, Cylinder,

3. Countertop for kitchen & bathroom, Cooking Tops, Washbasin, Vanity tops with sink

Specifications:

1. Dimensions:

a) Max.: 3,000 x 1,600mm (thickness: 5, 10, 12, 16, 18, 20, 25, 30mm etc.)

b) Min.: 300 x 300mm (thickness: 5mm)

2. Standard dimensions:

a) 1,600 x 3,000mm  1,500 x 3,000mm  1,400 x 2,800mm    1,200 x 2,400mm

b) 1,000 x 1,800mm   900 x 1,800mm   900 x 900mm    800 x 800mm

c) 600 x 600mm    450 x 450mm  300 x 600mm      300 x 300mm

3. Curve panel

a) Diameter: 600-34,000mm

b) Center angle: <=90

4. Customized dimensions available upon request